Configuring com ports – Stinger MC POWER SYSTEM MC2 User Manual
Page 37
MC
2
Power Systems User's Guide Chapter 6: Power System Management Software
Configuring COM Ports
The Advanced Power Monitor software does not automatically determine which COM
port has been set for the communication between the computer and power system. The
user will have to manually determine what COM port has been assigned and manually
set it in the Advanced Power Monitor software by performing the following steps:
1 From
the
Start menu, point to Settings, and then click Control Panel.
2 Double-click
System.
3 Click
the
Hardware tab.
4 Click
Device Manager, depicted as follows:
5
Click the plus sign (+) by Ports (COM & LPT).
1110227 Revision 2
November 2006
25