Sony Data Projector VPL-CX150 - Manual (Page 18)

18
Remote Commander
c AIR SHOT key
Displays the Network Presentation
Home.
For details, see Operating Instructions
for Network (stored on the CD-ROM).
d APA (Auto Pixel Alignment) key
Automatically adjusts a picture to its
clearest while a signal is input from a
computer.
For details, see “Smart APA” in “The
Function Menu” on page 39.
e ENTER key
f RESET key
Resets the value of an item to its factory
preset value or returns the enlarged
image with D ZOOM key to its original
size. This key functions when the menu
or a setting item is displayed on the
screen.
g KEYSTONE (Trapezoidal
distortion correction) key
h ASPECT key
Select the aspect ratio of the picture.
Each time you press this key the aspect
ratio changes according to the input
signals.
i VOLUME +/– keys
j FREEZE key
Freezes the projected picture. To cancel
the frozen picture, press the key again.
This function is available when the PC
signal is input.
k ID MODE 1/2/3 keys
When you apply the same identification
number as the projector to a Remote
Commander you can easily adjust or
control each projector with a Remote
Commander whenever you use two or
more projectors in one room.
For details, see “ID Mode” in the
Installation menu on page 42.
l CONTROL S OUT jack (stereo
mini-jack)
This function is not provided in this
projector.
m MUTING keys
Cut off the picture and sound.
• PIC: Cuts off the picture. Press again
to restore the picture.
• AUDIO: Press to temporarily cut off
the audio output from the speaker.
Press again, or press the VOLUME+
key to restore the sound.
n D ZOOM (Digital Zoom) +/– key
Enlarges the image at a desired location
on the screen.
This function is available when the PC
signal is input.
o ZOOM +/– keys
This function is not provided in this
projector.
p FOCUS +/– keys
This function is not provided in this
projector.
q SHIFT +/– keys
This function is not provided in this
projector.
r M / m / < / , keys (Arrow)
These keys have same function as the v/
V/b/B
keys on the Control Panel of the
main unit.
s MENU key
t COMMAND ON/OFF switch
When this switch is set to OFF, the keys
on the Remote Commander do not
function. This saves battery power.
u Infrared transmitter