Schumacher INC-800A - Manual (Page 11)

• 8 •
Completion of Charge
Charge completion is indicated by the display showing CHARGE COM-
PLETE on the top line and TURN OFF CHARGER on the bottom line. It
will also beep four times to let you know. When the charger has stopped
charging it will switch to the Maintain Mode of operation.
Maintain Mode
When the battery is fully charged, the charger will start Maintain Mode.
In Maintain Mode, the charger keeps the battery fully charged by deliver-
ing a small current when necessary. The voltage is maintained at a level
determined by the charge mode selected.
General Charging Notes
Fan: It is normal for the fan to be on all the time. Keep the area near the
charger clear of obstructions to allow the fan to operate efficiently.
Restart: If any button is pressed after charging has started, the charg-
ing process will stop. Press the CHARGE ON/OFF button to restart the
charge cycle.
MAINTENANCE INSTRUCTIONS 12.
Before performing maintenance, unplug and disconnect battery charger 12.1
(see sections 6.7 and 7.6).
After use, unplug and use a dry cloth to wipe all battery corrosion and
12.2
other dirt or oil from terminals, cords, and the charger case.
Servicing does not require opening unit, as there are no user-serviceable
12.3
parts.
STORAGE INSTRUCTIONS 13.
Store charger unplugged, in an upright position. Cord will still conduct 13.1
electricity until it is unplugged from outlet.
Store inside in a dry, cool place (unless you’re using an on-board Marine
13.2
Charger ).
Do not store clips on handle, clipped together, on or around metal, or
13.3
clipped to cables.