Sennheiser EM 3731 - Manual (Page 39)

37
The operating menu
To automatically obtain an IP address (dynamic IP addressing):
̈
Change to the setting mode of the “ IP-Addr ” menu.
The first byte starts flashing.
̈
Press the jog dial 7 several times until the arrow points to “Auto”.
̈
Press the save button 8 .
̈
Switch the receiver off and on again (see “Switching the receiver on/
off” on page 19).
The new IP address becomes effective.
Displaying the network address (MAC address)
MAC Via the “ MAC ” menu, you can display the Media Access Control (MAC)
address of the Ethernet interface. The MAC address is fixedly stored in
each receiver and cannot be changed.
̈
Change to the setting mode of the “ MAC ” menu.
The 12-digit MAC address is displayed.
Setting a receiver to standby mode
Standby You can set a receiver to standby mode and mute it. To do so, proceed as
follows:
̈
Change to the setting mode of the “ Standby ” menu.
The icon and the green backlighting of the save button 8 flash.
̈
Press the save button 8 .
The esc button 6 is backlit in red. The receiver is set to standby mode
and the display is switched off.
Note:
The standby mode remains active even when you switch the receiver
off and on again.
To end the standby mode:
̈
Press the jog dial 7 or the esc button 6 .
The display is switched on.
Loading the factory-preset default settings
Reset Via the “ Reset ” menu, you can reset the current settings to the factory-
preset default settings.
̈
Change to the setting mode of the “ Reset ” menu.
The question “Reset to factory defaults?” appears. The green
backlighting of the
save button 8 flashes.
̈ Press the save button 8 until the progress bar is complete.
All settings except for the booster supply voltage, the sampling rate at
the digital output and the network address are reset to the factory-
preset default settings. The display changes to the selection mode of
the operating menu.
00:1B:66:00:00:01
00 1B
66 00
00 01
OFF
esc
s ave
syn c
digital audio
processing
syn c
DEV M H
z
790.800
03.03 BANK
CH
COM AF
000
Reset to
factory defaults ?
esc
s ave
syn c
digital audio
processing
syn c
DEV M H
z
790.800
03.03 BANK
CH
COM AF