Sennheiser EM 3731 - Manual (Page 35)

33
The operating menu
̈
Change to the setting mode of the “ Command ” menu.
The current configuration starts flashing.
̈
Select one of the four configurations by turning the jog dial 7 .
Note:
If you do not want to use the command function, select the
configuration “4”.
̈
Press the save button 8 .
The selected configuration is stored. The display changes to the
selection mode of the operating menu.
Changing to the extended menu
More Via the “ More ” menu, you can change to the extended menu with the
submenus “ Scan ”, “ Display ”, “ IP-Addr ”, “ MAC ”, “ Standby ” and “ Reset ”.
Scanning the frequency banks for interference-free channels
Scan Via the “ Scan ” menu, you can scan all frequency banks for free channels.
̈
Change to the setting mode of the “ Scan ” menu.
The following menu items appear:
– “Channel list”
displays the number of free channels for each frequency bank from
the last scan.
– “Scan new”
scans all frequency banks and displays the number of free channels
for each frequency bank.
– “Scan reset”
releases channels that were occupied or subject to interference
during the last scan (these channels a marked with a warning
triangle and the text “
Freq. occupied ” in the “ Tune ” menu).
Displaying a list of all free channels
Channel list Via the “ Channel list ” menu, you can display the last scan result. You can
then select a suitable frequency bank and a channel.
̈
Turn the jog dial 7 until the arrow points to “ Channel list ”.
̈ Press the jog dial 7 .
A table displays the number of free channels for each frequency bank.
̈
Turn the jog dial 7 to select a frequency bank with a sufficient number
of free channels.
̈
Press the save button 8 .
The selected frequency bank is automatically called up in the “ B.Ch ”
menu.
̈
Select a channel from this frequency bank (see “Selecting a frequency
bank and a channel” on page 28).
1
AF
COM AF
esc
s ave
syn c
digital audio
processing
syn c
DEV M
H z
790.800
03.03 BANK
CH
COM AF
Channel list
Scan new
Scan reset
B.Ch
1 . 790.800
MHz
Freq. occupied
Channel list
Scan new
Scan reset
Bank 4 5 6 U
Free 32 31 33 60
Bank 1 2 3
Free 43 40 42
esc
s ave
syn c
digital audio
processing
syn c
DEV M H z
790.800
03.03 BANK
CH
COM AF