Utilities menu, Menu selections – SMSC SMC6516TF User Manual
Page 78
5-20
C
ONFIGURING AND
M
ONITORING
Utilities Menu
The Utilities Menu is accessed from the Main Menu.
___________________________________________________
>>>> Utilities Menu <<<<
1. Console Configuration
2. Display/Clear Error Log
3. Password Configuration
4. Reset To Factory Defaults
5. Initiate Software Download
6. Establish Telnet Session
7. Initialize Modem
Enter Selection:
___________________________________________________
Figure 5-14. Utilities Menu
Menu Selections
Console Configuration—Displays the Console Configuration
Menu (see Figure 5-15). This menu displays and allows you to
change the current transmission baud rate for the out-of-band
management terminal or PC.
Display/Clear Error Log—Displays the error log, and allows
you to clear it with the prompt: “Type C to Clear.”
Password Configuration—Allows you to change the pass-
word. You are prompted with the message: ‘Enter New
Password.” You are then asked to reenter your password for
verification.
Caution:
You must remember the password. If a password is
set and then forgotten, you must call SMC Tech
Support to regain access to your system.