Sanitaire SC6070 Series - Manual (Page 8)

8
Fill Solution Tank
CAUTION: Use only commercially available carpet and upholstery cleaners
intended for machine applications.
Solution tank holds 1.5 gallons. Remove solution tank lid and fill with mixture of water
and extraction detergent. (Follow recommended mix ratio on extraction detergent label.)
Note: Do not overfill.
Attach Vacuum Hose Coupling
•
Push the hose coupling into the hose
inlet.
• Give a slight twist to secure.
Attach Solution Hose Fitting
•
Make sure the quick disconnects snap
together firmly. As you do this, always
inspect hoses for cracks, fraying or
leaks. Do not use if hoses are damaged.
Connect Electric Plug
CAUTION: To reduce the risk of electric
shock, do not lay cord on any
wet surfaces.
• Attach electric plug to extension cord
provided.
• Plug extension cord into outlet.
Power Switch
The power switch is located on the side of
the cleaner next to the powercord.
• Wear ear protection (not provided) if
operating the cleaner for a prolonged
period of time.
• Push power switch to turn on.
Carry Handle
• Carry handle is part of the tank.
• Always use this handle when lifting the
cleaner.
Prime Pump
HOW TO USE
Trigger
Hose Inlet
Solution
Hose
Fitting
Electric
Plug
Carry
Handle
•
Press trigger on solution wand until
there is a continuous flow of water. Your
pump is now primed.