SIIG 2S1P - Manual (Page 4)

4
Driver Installation
This section provides information on how to install the
SIIG 2S1P Combo Value drivers. Please make sure the
board is installed before proceeding.
Windows 95
1. At the Update Device Driver Wizard, click Next.
2. Insert the driver CD and click Other Locations.
3. Type in X:\2S1P\95, click OK, then click Finish.
(Change X: to match your CD-ROM drive letter)
4. From the Insert Disk window, click OK. When the
Copying Files dialog box appears, type in X:\95,
then click OK. (Change X: to match your CD-ROM
drive letter)
5. Restart Windows to complete the installation.
Windows 98/98SE
1. At the Add New Hardware Wizard, click Next.
2. Select Search for the best driver for your device
(Recommended), then click Next.
3. Select Specify a location, uncheck the other boxes,
insert the driver CD, type in X:\2S1P\98, then click
Next. (Change X: to match your CD-ROM drive
letter)
4. Click Next, then click Finish.
5. Restart Windows to complete the installation.
Windows ME
1. At the Add New Hardware Wizard, check Specify
the location of the driver (Advanced), then click
Next.