Sangean SANGEAN ATS-808A - Manual (Page 7)

PRELIMINARY SETTINGS
SETTING THE CLOCK
The time is displayed in the 24 hour mode
since most shortwave stations operate
according to Greenwich Mean Time. This
is the standard that is used throughout the
world.
The clock will start when 4 AA batteries are
installed. The display shows "0:00"
1. Press "TIME SET". "0:00" disappears
& for 12 seconds "TIME SET" flashes.
2. While "FLASHING" set the correct time
by pressing the numbered buttons. As
you press the corresponding button the
number shows up on the LCD display
3. If you press the wrong number, press the
"C" [CANCEL] button which deletes
one number at a time. Repeat step
#2 again.
NOTE
Time can only be adjusted when "TIME
SET" is in flashing mode.
7
TIME SET