Sangean SANGEAN ATS-808A - Manual (Page 18)

4. Press and hold the ( ) or (V) buttons for at least
a half second or more and the radio will scan
all the frequencies in that band, and will stop
automatically each time it lands on an active
station. Signal strength is recorded on the
SIGNAL STRENGTH INDICATOR.
5. Press and hold the ( ) or (V) buttons again to
resume scanning. When you reach the upper
or lower limits of the band, the scanning starts
all over again as long as the button is
depresseden once more.
6. Adjust the VOLUME and TONE controls
as you like.
18
TUNIGN
MANUL/AUTO
TUNIGN
MANUL/AUTO
UP
DOWN
ROTARY
TUNING
9K 10K
MW STEP
HIGH
LOW
LUNE
VOL
10
5
0
1 2 3 4 5 6 7