Samsung BN68-01412T-00 - Manual (Page 27)

English -
Setting the Channel Mode
You can display either the added channels list or the favourite channels list when the CH LIST button on the remote control
is pressed.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER
button.
2. Press the ▲ or ▼ button to select “Channel Mode”, then press the ENTER
button.
3. Press the ▲ or ▼ button to select “Added Ch.” or “Favourite Ch.”.
Press the ENTER button.
4. Press the EXIT button to exit.
Fine Tuning Analogue Channels
1. Use the number buttons to directly select the channel that you want to fine
tune.
2. Press the MENU button to display the menu. Press the ▲ or ▼ button to
select “Channel”, then press the ENTER button.
3. Press the ▲ or ▼ button to select “Fine Tune”, then press the ENTER
button.
4. Press the ◄ or ► button to adjust the fine tuning. Press the ENTER
button.
5. Press the EXIT button to exit.
Fine tuned channels that have been saved are marked with an asterisk “*”
on the right-hand side of the channel number in the channel banner.
To reset the fine-tuning, select “Reset” by pressing the ▲ or ▼ button and
then press the ENTER button.
Only Analogue TV channels can be fine tuned.
➣
➣
➣
Channel
Default Guide : Mini Guide
Channel List
Channel Mode : Added Ch. ►
Fine Tune
Signal Information
LNA : Off
Channel
Default Guide : Mini Guide
Channel List
Channel Mode : Added Ch. ►
Fine Tune
Signal Information
LNA
: Off
Added Ch.
Favourite Ch.
Channel
Channel List
Channel Mode
: Added Ch.
Fine Tune ►
Signal Information
LNA : Off
Fine Tune
ATV 6 * Fine Tuned
Reset
Return Save Move Adjust
+ 3
BN68-01412T-00Eng.indb 25 2008-08-14 �� 2:44:00