Sanus Systems PFPL - Manual (Page 15)

Shelf Pin x8
1. Insert Shelf Pins into holes at the lower positions of both the Sides (as illustrated above).
2. Tilt and slide Glass Shelf between Rails (ensuring frosted side down) and place on top of Shelf Pins.
3. Insert Shelf Pins into holes at the upper positions of one Side only.
4. Tilt and slide the second Glass Shelf between Side Rails. While holding one end of the shelf on pins
on one side insert remaining Shelf Pins into other side beneath Glass, then lower the shelf on top of the pins.
Curved edge of the glass
shelves must be placed at front
for curved front design .
Glass shelf Glass shelf
Flat edge of the glass
shelves must be placed at
front for the flat front design .