Charging the battery, Эю я, Charging – Siemens S75 User Manual
Page 10: Charging time, Operating time, Charge icon not visible, Display during operation
9
Getting started
right page (9)
of S75 MINOS SUG en-tr A31008-H2500-A81-1-7619 (19.09.2005, 15:27)
© Sie
mens AG 20
03,
C:
\Daten_
itl
\S
iemens\DTP-
Satz\
Prod
uk
te\S75_
Minos_1
\outp
ut\
SU
G
up
date2\
S7
5_M
INOS_sug_
en-
Temp
late:
X75,
Ver
sion 2
.2
; VAR
Language: en;
VAR
issu
e d
ate: 05
0822
Charging the battery
Charging
The battery is not fully charged
when delivered. Plug the charger ca-
ble into the bottom of the phone,
plug the power supply unit into a
mains power socket and charge for
at least two hours (for charging via
USB, see page 45). Do not interrupt
the charging procedure
prematurely.
à
Display when charging is
in progress.
Charging time
An empty battery is fully charged af-
ter about 2 hours. Charging is only
possible within a temperature range
of +5 °C to +45 °C. If the tempera-
ture rises/falls 5 °C above/below this,
the charge symbol flashes a warn-
ing. The mains voltage specified on
the power supply unit must not be
exceeded.
Operating time
The operating time depends upon
the respective conditions of use. Ex-
treme temperatures considerably re-
duce the phone’s standby time. You
should therefore avoid leaving the
phone in the sun or on a radiator.
Talktime: up to 300 minutes
Stand-by time: up to 300 hours
Charge icon not visible
If the battery has been discharged
fully, the charge icon is not immedi-
ately visible when the power supply
is plugged in. It will appear after up
to two hours. In this case the battery
is fully charged after 3 to 4 hours.
Only use the plug-in power supply unit
included in delivery!
Display during operation
Charge level display during opera-
tion (empty–full):
Э
Ю
Я
A beep sounds when the battery is
nearly empty. The charge level of the
battery is only displayed correctly af-
ter an uninterrupted charging/dis-
charging cycle. You should therefore
not remove the battery unnecessarily
and where possible not terminate the
charging process before completion
.
Additional information
The power supply unit heats up when used
for long periods. This is normal and not
dangerous.
If the battery is removed for longer than
30 seconds, the clock must be reset.