Sony LocationFree Player for PSP - Manual (Page 21)

Sett
ing Up
the
Loca
tionF
ree®
Pla
y
e
r
21
6
Select the product type of the
connected device, and then press the
right button.
z
Tip
The number shown following the product type,
for example the "(1)" in "DVD Recorder (1)",
indicates the remote control’s mode. Select one of
the remote control modes and if the remote
control does not operate properly, try using the
other remote control modes. For details on the
remote control’s mode, refer to the instructions
supplied with the video device in use.
7
Test the remote control to make sure
it works.
By selecting [Power] and then pressing the
button, see if you can turn the device on
and off.
In some cases it may take as long as 5
seconds for the device to turn on after you
press the
button.
Notes
• If you press the button several times but are not
able to turn the power on and off, press the left
button to return to the previous screen and
check that the manufacturer and product type
selections are correct.
• To perform the remote control test, the PSP ®
system and Base Station must have an active
connection between them.
z Tips
• When using a remote control to watch TV or
video, even if the power turns on and off
correctly with [Power], other buttons may not
be enabled. If this happens, the remote control
settings may be incorrect. Adjust the settings to
use the correct remote control.
• Some devices may not have a [Power] button
(for example, some DVRs do not). In this case,
after completing the remote control settings,
use the on-screen remote control to confirm
that the buttons are enabled. Also, skip the 7th
step forementioned.
• If the buttons of the selected on-screen remote
control are not enabled, retry the on-screen
remote control settings by repeating the steps
from 3 to 6 forementioned.
After you have confirmed that the remote
control is working properly, press the right
button to go to the next screen.
8
Save your settings.
Press the
button to save the remote
control information to the PSP
®
system.
You can perform basic setup ( 1 page 9) for use
of the PSP
®
system’s LocationFree® Player
feature.
• Device registration on the Base Station
• Creation of a network connection
Using Basic Settings