Sharp LC 26DV27UT - Manual (Page 15)

13
Part names
Remote control unit
1
3
6
5
4
2
22
23
14 15 16
18
19
17
20
21
26
25
29
30
31
27
28
11
12
13
9
10
7
8
24
NOTE
When using the remote control unit, point it at the TV/DVD.
(See page 10.)
There is a protective film covering the face of the remote
control. Please remove this film before use.
•
1 POWER: Switch the power on or enters standby mode.
(See page 16.)
2 0–9: Set the channel. (See page 16.)
3 • (DOT) / SUBTITLE: To select 4-digit channel number.
(See page 16.) / Set subtitle. (See page 28.)
4 REV : Review playback. (See page 27.)
5 SKIP 9/:: Skip chapter to reverse or forward direction.
(See page 27.)
6 STILL/PAUSE: Still picture of DVD / Pause CD sound.
(See page 27.)
7 SETUP/TV MENU: TV mode - Display menu of TV /
DVD mode - Call up initial setup mode. (See pages 23,
31.)
8 ▲/▼/◀/▶/ENTER: Select a desired item on the screen.
SLOW / : Reverse/Forward -slow motion. (See
page 27.)
9 EXIT/CANCEL: Turn off the menu screen / Reset
information in the menu.
10 PLAY MODE: Select playback mode. (See page 27.)
11 AUDIO: Switch the sound of TV / Change sound track
language. (See pages 18, 28.)
12 RETURN: Turn off the DVD setup menu screen.
13 A-B REPEAT: Repeat playback between A and B. (See
page 27.)
14 DISPLAY: Display the current channel (or input source)
information on the screen. (See page 17.)
15 TV/DVD: Switch between TV/AV and DVD. (See pages
16, 26.)
16 EJECT: Eject the disc. (See page 26.)
17 SLEEP: Allows you to set a time when the TV/DVD
automatically switches to standby. Each time you press
this button, the remaining time setting switches by 10
minutes up to 2 hours. This display will disappear after
a few seconds, and the sleep timer automatically starts
counting down.
If you want to adjust the sleep timer again, you can
press this button repeatedly then change the time
setting.
Select “Off” by pressing SLEEP repeatedly to cancel
the sleep timer.
The TV/DVD will enter the standby mode when the
remaining time reaches zero.
18 INPUT: Select input source. (See page 15.)
19 VIEW MODE: Select the screen size. (See page 18.)
20 VOL +/–: Set the volume.
To increase the volume, press VOL+.
To decrease the volume, press VOL–.
VOL+/– on the TV/DVD operates the same as VOL+/–
on the remote control unit.
21 CH / : Select the channel. (See page 16.)
22 MUTE: Mute the sound. “Mute” will be displayed on the
screen, and the sound is silenced. The muting feature
can be released by pressing this button again or one of
VOL +/–.
Sound via the COAXIAL DIGITAL AUDIO OUTPUT
terminal is not muted.
23 FWD: Fast forward playback. (See page 27.)
24 PLAY: Playback. (See page 26.)
25 STOP: Stop. (See page 26.)
26 DVD MENU: Display DVD menu.
Press ▲/▼/◀/▶ to select desired title.
27 TOP MENU: Display title menu.
Press ▲/▼/◀/▶ to select desired title.
28 ANGLE: Change playback channel. (See page 28.)
29 ZOOM: Zoom. (See page 27.)
30 DIRECT SKIP: Locating desired scene of DVD. (See
page 27.)
31 MARKER: Index (DVD). (See page 28.)
•
•
•
•
•
•
•
•
•
52L0131B.indb 13 52L0131B.indb 13 6/24/09 1:42:01 PM 6/24/09 1:42:01 PM