StarTech.com ST1000BT32 User Manual
Page 4
IIn
nttrro
od
du
uc
cttiio
on
n
Thank you for purchasing a StarTech.com 110/100/1000 Mbps PCI Ethernet Card.
Featuring Auto-Negotiation capability and support for data transmission bandwidth up to
2000Mbits/sec, the card is easy to install and set up, and is fully Plug and Play
compatible in a wide range of operating environments.
Features
• Automatically configures IRQ and I/O addresses
• Two LEDs indicate network link/activity and 10/100 or 1000Mbps selection.
• Supports 32-bit PCI Bus Master for high performance and low processor utilization
• Supports early interrupt on transmit for increased performance
• Supports 32-bit 33/66MHz PCI Local Bus Master for high-speed operation
Before You Begin
System Requirements
• An IBM compatible notebook computer with a Pentium-based processor
• An open PCI slot
• One of the following operating environments: Windows Vista/XP/ME/2000/98,
Windows NT, Linux, NetWare 3.x/4.x, Lan Manager, TCP/IP software
Contents
This package should contain:
• 1 x PCI Ethernet Adapter card
• 1 x Driver disk
• 1 x Installation Guide
Instruction Manual
1