Sunbeam 4211 User Manual
Page 9
to Off.
M
AINTAINING
Y
OUR
S
TEAM
M
ASTER
®
I
RON
C
LEANING THE
S
OLEPLATE
Clean the soleplate if starch or other residue accumulate.
To clean the Soleplate:
1. Allow the iron to cool and then wipe it with a soft, damp cloth.
WARNING: DO NOT use abrasive cleansers, scouring pads or vinegar to clean the soleplate.
This will damage the finish.
2. Run the iron over an all-cotton cloth to remove any residue.
U
SING THE
S
ELF
-C
LEANING
F
EATURE
You should use the Self-Cleaning feature once a month to maintain the optimal performance
of your iron.
To use the Self-Cleaning feature:
1. Move the Steam Lever back and forth from
O
/Off (Dry) several times to remove debris
and minerals from the Steam Valve. This keeps water flowing into the steam chamber.
M
AINTENANCE
C
LEANING THE
A
NTI
-C
ALCIUM
S
YSTEM
The STEAM MASTER
®
iron houses an anti-calcium filter in the reservoir, which eliminates
impurities from the water.
To prolong the efficiency of this filter:
1. Unplug the iron and allow it to cool.
2. Locate the water cup that accompanied the iron. Fill it with water to the Sunbeam logo
in the top right corner. Add 1 teaspoon of salt to the water and fill the water reservoir
with this solution.
3. Leave the solution in the water reservoir for 15 minutes, then empty it.
4. Fill the water reservoir a second time with the salt water solution and empty it again
after 15 minutes.
5. Fill the tank with fresh water to rinse and empty.
The Anti-Calcium System should be cleaned approximately once a month.
.
(select models only)