Sunbeam 4211 - Manual (Page 7)

U
SING THE
I
RON
’
S
S
PECIAL
F
EATURES
S
PRAY
M
IST ® F
EATURE
The SPRAY MIST ® feature is a powerful water spray mist that dampens the fabric to aid in
removing wrinkles from heavy fabrics and for setting creases.
To use the SPRAY MIST
® Feature:
Press the SPRAY MIST ® button firmly.
S HOT OF S TEAM
® F EATURE
The SHOT OF STEAM ® feature provides an extra burst of steam for deep penetration
of stubborn wrinkles. You can use this feature while Dry or Steam ironing, but the water
reservoir must be at least 1/4 full of water.
To use the SHOT OF STEAM ® Feature:
Place the iron on top of the wrinkle and press the SHOT OF STEAM ® button each time you
would like an extra burst of steam. The SHOT OF STEAM ® feature may be used continuously
with just a short pause between shots.
V ERTICAL S TEAM (select models only)
The vertical steam feature allows your iron to function as a garment steamer.
T
IP : When using the vertical steam on clothing, hang the clothing on a clothes hanger
for best results. Hanging curtains and drapes may also be steamed.
To use Vertical Steam:
1. Make sure that the iron has heated up (2 minutes).
2. Hold the iron in a vertical position, with the iron close to but not touching the fabric
you want to steam.
3. With your other hand, pull the fabric tight.
4. Press the SHOT OF STEAM
® button for approximately 3-second intervals as you
move the iron across the wrinkled area.
WARNING: To prevent the risk of burns, keep your hand away from the area being steamed.
WARNING: DO NOT steam garments while wearing them; this may result in injuries.
P ATENTED M OTION S MART
® A UTO -O FF F EATURE
When the iron is plugged in, the Power Indicator will light steadily, indicating that there
is power to the iron.
If you leave the iron:
• in a horizontal position without moving it, or accidentally tip the iron over, it will automatically
stop heating after 30 seconds. The Power Indicator will blink to let you know that the iron
has stopped heating.
• in a vertical position (on its heel rest) without moving it, the iron will automatically turn off
after 15 minutes. The Power Indicator will blink to let you know that the iron has stopped
heating.
I MPORTANT : The Power Indicator will continue to blink until the iron is unplugged or reset.