beautypg.com

Southbend ES/20PC User Manual

Onvection

background image

Job Item#

www.yatesgd.com www.yatesgraphicdesign.com

Standard Features

- ENERGY STAR

®

qualified (standard depth only)

- 11kW high efficiency heating elements

- Available standard and bakery depths

- Double deck convection oven is 64” in height

- Patented “plug-in, plug-out” control panel - easy to service

- Stainless Steel front, sides and top
- Dependent doors with windows (Full 180° opening)

- Coved, fastener-free, porcelain interior

- Heavy duty stainless steel door handle

- Soft Air, two speed, 1/2 hp, fan motor

- 11-position rack guides and 5 plated oven racks

- Forced cool down fan mode

- Oven “ready” light -cycles with burners

- Interior oven lights

- Stainless steel rear jacket

Available Controls

SC-Standard Controls

140°F to 500°F solid state thermostat and 60 minute

mechanical cook timer.

CCH-Cycle / Cook & Hold Control

150°F to 500°F temperature controller with 140°F to 200°F “Hold”

thermostat Dual digital display shows time and temperature. A fan

cycle timer pulses the fan.

(ES20/SC shown with optional casters)

Printed in USA

StAndArd COnStrUCtIOn SPECIFICAtIOnS

Exterior Finish: Stainless steel front, top, sides and rear

jacket.
doors: Dependent doors with windows. Stainless steel

construction, heavy-duty welded steel frame and 5/8” diameter

full-length hinge pin.
Electrical System: Terminal connections are located below

oven section and are accessible from the front of the oven.

These sheath type electrical heating elements located at

the rear of the oven function as a single heating unit with a

combined rating of 11 kW per deck. Available voltages include

208. 240, 380, and 480 VAC single or three phase, 50/60 Hz.

Ovens equipped with 480VAC single or three phase heating

elements use 240V controls and motors and do not require

separate electrical lead wires.

rack and rack Guides: Heavy-duty removable wire rack

guides spaced on 1-5/8” centers offer 11 different rack posi-

tions. 5 wire racks provided with each oven.
Blower Fan and Motor: 1/2hp, 2-speed motor, 1710/1120
Oven Heating: Oven heating is regulated by an adjust-

able solid state thermostat control. Blower fan circulates air

within the cavity “scrubbing” heat to the oven interior for even

heat distribution within the cavity. Manual reset high limit

temperature control protects the oven from overheat condition.
Control Panel: Located of front, at right side of oven, away

from heat zone. Removable panel opens downward for easy

servicing.
Legs: 6” stainless steel legs standard.
note: Oven cannot be operated without fan in operation.

From E/20 Rev 9 (July/2012)

C

ONVECTION

O

VEN

M

araThONEr

G

Old

E

LECtrIC

, d

OUBLE

d

ECK

ES/20SC, ES/20CCH

EB/20SC, EB/20CCH

This manual is related to the following products: