Sennheiser SR 3254 - Manual (Page 22)

21
TUNE Selecting the frequencies to be stored in the
channel bank “U”
Via the “ TUNE ” menu, you can freely select the frequencies to
be stored in the channel bank “U” (user bank).
̈
Press the
̆
/
̄
buttons to select the “ TUNE ” menu. The LC
dot “ TUNE ”
ቦ
lights up.
̈
Press the SET button to get into the setting mode of the
“ TUNE ” menu.
The LC dot “ TUNE ”
ቦ
and the “ FREQUENCY MHZ ” display
ባ
start flashing.
Note
When pressing the SET button for one second, you can use
the
̆
/
̄
buttons to select a different channel for which you
can then change the frequency.
When you have selected the channel bank “F” and then select
the “
TUNE ” menu, the transmitter automatically switches to
channel 01 of the channel bank “U” and “U.01” appears on the
display. Otherwise, the current channel of the channel bank “U”
is displayed.
̈
Press the
̆
/
̄
buttons to select the desired transmission
frequency. Transmission frequencies are tunable in 5-kHz
steps within a switching bandwidth of 36 MHz max.
̈
Press the SET button to store your selection. “Sto.” briefly
appears on the display. While the transmitter changes to the
new frequency, it is muted.
ቦ ባ