Sennheiser SR 3254 - Manual (Page 14)

13
Rack-mounting the transmitter and mounting the antennas
to the front of the rack
̈
Mount the antenna holders to the handles of the
transmitter as shown in the diagram on the left.
̈
Hook the two rack mount “ears”
ƿ
to the rear of the
transmitter.
̈
Pull the cables of the antenna holders through the holes
in the rack mount “ears”.
̈
Secure the rack mount “ears” to the left and right of the
transmitter using four recessed head screws respectively.
̈
Connect the cables of the antenna holders to the antenna
sockets
ƽ
at the rear of the transmitter.
̈
Slide the transmitter into the 19" rack.
̈
Connect the telescopic antennas to the BNC sockets of the
antenna holders
.