Snapper R8002BE - Manual (Page 7)

Handle & Controls
Footnotes:
TP 400-5202-5-RT-N
Manual No. 7006033 LARGE FRAME REAR TINE TILLERS
SERIES 2
7
Part No Description Item Qty Note
1 7035206 BAR, Handle Was 35025
2 7014681 2 BUSHING
3 BAIL (Not Available) Was 18577
4 7014682 CLIP, Cable
5 7036061 PANEL, 5 HP
6 LINK, Wire 2.25" (Not Available) Was 14719
7 7091122 2 SCREW, 1/4-20 x 1/2" Self-Tapping Was 90539
8 7014720 CLIP-SNAP
9 7090858 3 SCREW, 5/16-18 x 1/2" Self-Tapping
10 BRACKET (Not Available) Was 32284
11 2 PLATE, Tap (Not Available) Was 51462
12 TUBE, Handle Bar Support (Not Available) Was 38066
13 7022295 GRIP, Handle Was 10681
14 7014380 SPRING
15 LATCH (Not Available) Was 40509
16 7010935 WASHER, Flat .77 x 1.13 x .06
17 7090620 2 NUT, 3/4-16 Hex Lock
18 7047854 BRACKET, Latch
19 7090361 6 SCREW, 5/16-18 x 5/8" Self-Tapping
20 7090289 NUT, 3/8-24 Hex Center Lock
21 7091588 4 BOLT, 3/8-16 x 3/4" Hex Flange Lock Was 90612
22 7036106 BRACKET, Handle
23 7090169 SCREW, 3/8-24 x 2 1/2" Hex Head Cap
24 7090864 WASHER, 13/16 Flat
25 7014840 RETAINER, Nut Locking
26 7091809 COTTER-PIN, 5/32 x 1 1/4" Was 90654
27 7015251 SPRING, Traction Cable
28 7018776 CABLE, Traction Control
29 7057415 CABLE, Tine Control (Includes items 6 & 8)
30 7015252 SPRING, Tine Cable
31 7091575 2 NUT, 5/16-18 Hex Lock Was 90184
32 7090188 4 WASHER, 5/16 Flat
33 7091830 2 SCREW, 5/16-18 x 3" Hex Head Cap Was 90553
* NOTE: This part may be available from DPNI 1-800-558-1848 (Todd Graff)