Sharp AQUOS 9JDJ3BX0131A - Manual (Page 22)

20
Watching TV
View mode for 4:3 programs
Stretch:
This mode is useful for 1.78:1 DVDs.
When viewing 1.85:1 DVDs,
stretch mode will still show very
thin black bands at the top and
bottom of the screen.
Side Bar:
Suitable for viewing conventional
4:3 programs in their normal
format.
S.Stretch (Smart stretch):
Suitable for stretching 4:3
programs to fill the screen.
Zoom:
Suitable for viewing wide-screen
2.35:1 anamorphic DVDs in full
screen.
View mode for HD programs
Stretch mode is available for HD programs.
Suitable for viewing wide-screen 1.78:1 aspect-ratio
programs. When viewing 1.85:1 programs, the stretch
mode will still show very thin black bands at the top
and bottom of the screen.
NOTE
• You can enter to the same menu screen from “Picture”
menu.
• You cannot select “Side Bar” and “S.Stretch” when a
720p, 1080i or 1080p signal is being input.
• Some High Definition and/or Digital broadcasts may not
allow you to change the picture size.
• In PC/HDMI Mode, only the “Side Bar”, “Stretch” and “Dot
by Dot” picture size features are available. In PC Mode
(WXGA), only the “Stretch” and “Dot by Dot” picture size
features are available.
Labeling channels
To create channel labels
1 Select a channel you want to label.
2 Press MENU, then press ▲/▼ to select “Channel”,
then press ▶ or ENTER.
Press ▲/▼ to select “Ch Label”, then press ▶ or
ENTER. The Ch Label menu will appear.
3 Press ◀/▶ to select a channel you want to label,
then press ▼.
Ch Label ABC
Label Clear >>
: Adjust
Ch Label
Channel Number 15.1
: Select ENTER : Set
4 Press ◀/▶ repeatedly until the character you want
appears in the first space.
The characters rotation as follows:
SPACE
- , () @ / + = -
If the character which you desire appears, press
ENTER. Repeat this step to enter the rest of the
characters.
When you finish inputting the label name, press
ENTER.
5 Repeat steps 1-5 for other channels. You can
assign a label to each channel.
6 Press EXIT to return to the normal screen.
To erase channel labels
1 Select a channel with a label which you want to
remove.
2 Press MENU, then press ▲/▼ to select “Channel”,
then press ▶ or ENTER.
Press ▲/▼ to select “Ch Label”, then press ▶ or
ENTER to display the Ch Label menu.
3 Press ▲/▼ to select “Label Clear”. Press ▶ or
ENTER.
4 Repeat steps 1-4 to erase other channel labels.
5 Press EXIT to return to the normal screen.
1 Press VIEW MODE.
• The View mode menu displays.
• The menu lists the view mode options selectable for
the type of video signal currently being received.
2 Press 0–3 or ▲/▼ to select each view mode
directly while the View mode menu is still on the
screen.
• Each time VIEW MODE is pressed, View Mode item
toggles.
• You can also select View Mode item by pressing ▲/▼.
• You can sequentially select a view mode that has its
own aspect ratio.
Selecting the digital audio language
When two or more audio languages are included in a
digital signal, you can select one of the audio languages.
1 In digital TV mode, press AUDIO and the “Audio
Language” menu screen displays.
2 Press ▲/▼ or 0-6 to select your desired language.
3 Press EXIT to return to the normal screen.
NOTE
• Digital audio is active only when receiving digital
boardcasting, not when receiving analog boardcasting.
Dot by Dot (for PC/HDMI mode
only):
Detects the resolution of the signal
of the image and it will be shown
on the screen with same amount of
pixels.
3BX0131A.indb 20 3BX0131A.indb 20 4/7/2010 6:40:05 PM 4/7/2010 6:40:05 PM