Example: multiple line input, Writing and editing a text message, Entering special characters – Siemens Gigaset E45 User Manual

Page 22: Writing an sms/name (without predictive text), During a call

Notes on the operating instructions

Gigaset E45 / English / A31008-M1751-R201-1-SM19 / start_guide_time.fm / 04.08.2005

Example: multiple line input

There are many situations in which you

can change the settings of a display or

enter data in several lines.
In this user guide symbols are used to

guide you step by step through multiple

line input. This is illustrated below using

the example of "Setting the date and

time". The things you have to do are

explained in the boxes.
You will see the following display (exam-

ple):

Writing and editing a text
message

The following rules apply when writing a

text message:

Control the cursor with

u v t s.

Characters are added to the left of the

cursor.

Press the star key

* to show the

table of special characters.

The first letter of the name of directory

entries is automatically capitalised, fol-

lowed by lower case letters.

Entering special characters

You can call up the table of special charac-

ters when writing an SMS using the

key. Select the required character and

insert it with

§Insert§

Writing an SMS/name

(without predictive text)

Requirement:

Your base station must support SMS.
Press and hold the hash key

# to

switch from "Abc" mode to "123" and from

"123" to "abc" and from "abc" to "Abc"

(upper case: 1st letter upper case, all oth-

ers lower case). Press the hash key

before entering the letter.
The following applies when writing an

SMS:

The display shows whether upper case,

lower case or digits is selected. "Abc",

"abc" or "123" appears at the top right

of the display.

When you press a key and hold it, the

characters of that key appear in the

bottom display line and are high-

lighted one after the other. When you

release the key the highlighted charac-

ter is inserted into the input field.

Date:

Enter day, month and year in 6-digit

format.

The second line is marked with [ ] to

show it is active.

Enter the date using the digit keys.

Time:

Enter hours/minutes in 4-digit format.

Press the

s key.

The fourth line is marked with [ ] to show

it is active.

Enter the date using the digit keys.

Save changes.

Press the display key

§Save§

Then press and hold the

a key.

The handset changes to idle status.

Date/Time

Date:
[10.06.05]
Time:
11:11

Save