Samsung DynaFlat TX R3075WH - Manual (Page 33)

English - 33
O
P E R AT I O N
Adding and Erasing Channels
To add channels that were not memorized (or to delete unwanted channels from
memory):
1
Press the MENU button.
Press the … or † button
to select “Channel”, then
press the ENTER button.
2
Press the … or † button
to select “Add/Delete”,
then press the ENTER
button.
3
Repeatedly pressing the
ENTER button will
alternate between add
channel and delete channel.
Press the number buttons
(or CH
/ buttons) to
switch to the appropriate
channel, then repeat above.
Press the EXIT button to
exit.
Channel 11-0 Not In Memory
Press ENTER to add the channel
Add
Channel 11-0 In Memory
Press ENTER to delete the channel
Delete
Add/Delete
Add/Delete
Antenna : Air √
Auto Program √
Add/Delete √
Favorite Channels √
Name √
Fine Tune √
Signal Strength √
T V Channel
Antenna : Air √
Auto Program √
Add/Delete √
Favorite Channels √
Name √
Fine Tune √
Signal Strength √
T V Channel
Alternate method:
Simply press the ADD/DEL button
on the remote control to add
channels that were not memorized
or to delete unwanted channels
from memory.
ble
Air
Channel 11-0 In Memory
Press ENTER to delete the channel
Delete
Add/Delete
AA68-03263C-00_eng_Chapter3 3/11/05 4:36 PM Page 33