Charge battery, Getting started, A d g – Siemens A52 User Manual

Page 10

Getting Started

A52 Fox en, A31008-H6250-A1-1-7619 (4. July 2003, 15:52)

Siem

ens AG 2002

, I

:\Mob

il\A5

2_Fox\e

n\A52_

Startup.fm

Charge battery

The battery is not fully charged

when delivered. Plug in the charger

cable at the bottom of the phone,

plug in the power supply unit to the

mains power socket and charge for

at least two hours.

Display when charging is

in progress

Charging time
An empty battery is fully charged

after about 2 hours. Charging is only

possible in an ambient temperature

of 5 °C to 40 °C (the charge icon

flashes as a warning when the tem-

perature is 5 °C above/below this

range). The voltage specified on the

power supply unit must not be ex-

ceeded.
To use the full performance of the

battery, the battery must be fully

charged and discharged at least

five times.

Charge icon not visible
If the battery is totally discharged no

charge icon is displayed when the

charger is plugged in. It is displayed

after 2 hours at most. In this case

the battery is fully charged after

3-4 hours.
Only use the charger provided!
Display while in service
Charge level display during opera-

tion (empty-full):

a d g

A beep sounds when the battery is

nearly empty. The charge level of the

battery is displayed correctly only

after uninterrupted charging/dis-

charging. You should not remove

the battery unnecessarily and if pos-

sible not end charging prematurely.

jkl

Note
The charger heats up when used for long

periods. This is normal and not dangerous.
Operating times.................................p. 60
Quality declaration for the battery..... p. 74