Samsung 1100MB - Manual (Page 11)

2. Exit button [ ] Use this button for Exit the active menu or the OSD.
3. Adjust buttons
[ ] / [ ] / [ ]
These buttons allow you to highlight and adjust items in the
menu.
Adjust Brightness and Contrast.
4. Menu button [ ] Use this button for open the OSD and activate a highlighted
menu item.
5. Power indicator This light glows green during normal operation, and blinks green
once as the monitor saves your adjustments.
6. Power button [ ] Use this button for turn the monitor on and off.
See PowerSaver described in the manual for further information regarding power saving
functions. For energy conservation, turn your monitor OFF when it is not needed, or when
leaving it unattended for long periods.
Rear
(The configuration at the back of the monitor may vary from product to product.)
1. Power port Connect the power cord for your monitor to the power port on
the back of the monitor.
2. Signal port Connect the signal cable to the 15-pin, D-sub connector on the
back of your computer.
3. BNC Connectors Connect the signal cable to the BNC signal port on the back of
your monitor.
See Connecting the Monitor for further information regarding cable connections.