Sony PSP-1003 - Manual (Page 78)

78 Photo options menu
You can transfer images with another PSP™ system using Ad Hoc Mode
(
page 111). The steps for the sender and the receiver are different.
1
Set up for Ad Hoc Mode (both sender and receiver).
1 Turn on the WLAN switch on the left side of the PSP™ system
(
page 22).
2
Prepare to receive the image (receiver).
1 Under , select the icon for the location where you want to save the
image, and then press the button.
2 Select "Receive", and then press the button.
The system is now ready to receive an image.
3
Send the image (sender).
1 Under , select the image that you want to send, and then press the
button.
2 Select "Send", and then press the button.
The nicknames for PSP™ systems ready to receive an image are displayed.
3 Select the system to send to, and then press the button.
The system starts to send the image.
4
Save the image received (receiver).
After the transfer has been completed, the image that was received is
displayed on the screen.
1 With the image displayed, press the button.
A confirmation message is displayed.
2 Select "Yes", and then press the button.
Hints
• The location where an image is saved depends on your selection in step 2-1. Note that you
cannot save images in the Digital Camera Images folder.
• You can also transfer images using the on-screen control panel ( page 72).
Sending and receiving images
Sender Receiver