Samsung 2AE0 - Manual (Page 4)

English - 4
Channel - Fine Tune
If the reception is clear, you do not have to fine-tune the
channel, as this is done automatically during the search and
store operation. If however the signal is weak or distorted, you
may have to fine-tune the channel manually.
Adjust the fine tuning by pressing
the ◄ or ► button.
To store the fine tuning setting
in the TV’s memory, press the
ENTEr button.
To reset the fine tuning to “0”,
select ”Reset” by pressing the
▲ or ▼ button, then press the ENTEr button.
Channel - Memorizing the Channels
Your TV can memorize and store all of the available channels
for both air and cable channels. After the available channels
are memorized, use the CH and CH buttons to scan
through the channels.
This eliminates the need to change channels by entering the
channel digits. There are three steps for memorizing channels:
“Air/Cable”, “Auto Program” and “Add/Delete”.
 Air/Cable
Before your TV can begin
memorizing the available
channels, you must specify
the type of signal source
that is connected to the TV
(i.e., an antenna or a cable
system). Select “Air” or
“Cable” by pressing the ◄/►
button.
 Auto Program
All available channels are
automatically stored in
memory when channels are
selected by the direct tuning
function.
Press the ENTEr button
at any time to interrupt the
memorization process.
 Add/Delete
You can add or delete
a channel to display the
channels you want only. To
use the “Add/Delete” function,
first run Auto Program.
Select “Deleted” or “Added”
by pressing the ENTEr
button.
Channel - Channel Grouping
You can choose your category
and find your desired channel
in a few seconds. You can save
a channel under the following
categories: Movie, Music, News,
Sport, and User.
Method:
▲/▼ : Used to select a
Programme.
◄/► : Used to select the desired
channel group.
▲/▼ : Used to confirm the new
choice.
➢ You can press ToolS button
and enter EasyView to use this function.
r.SUrF Feature
(depending on the model)
This feature allows you to set
the TV to return to a particular
channel after a certain amount of
time. For example, you may be
watching a channel when
commercials start. You can press
ToolS button to enter r.SUrF
to set the r.SUrF to “5 minutes”,
then switch channels. After
minutes, the TV will return to the original channel.
Press the
ENTEr button on the remote control to set the timer
in thirty second intervals, up to five minutes.
Move Adjust Return
Channel TV
Air/Cable : Air ►
Auto Program ►
Add/Delete ►
Fine Tune ►
Channel Grouping ►
Move Enter Return
Add/Delete TV
▲ More
P 3 : Added
P 4 : Deleted
P 5 : Deleted
P 6 : Deleted
P 7 : Deleted
▼ More
Fine Tune
P 3 0
Reset
Move Save
Adjust Return
Move Adjust Return
Channel Grouping TV
Group Select : A11 ►
Set Channel Group ►
Move Adjust Return
Set Channel Group
Movie Music News Sport User
P 3
P 4
P 5
P 6
P 7
P 8
P 9
P 10
Surf 00: 29
Search
Stop
3%
Enter Return
Air 3
AA68-03992N.indd 4 2009-03-25 오후 2:39:41