Schneider Electric SMART-UPS 750VA - Manual (Page 8)

5 Smart-UPS X-Series Operation
Advanced Menus
The Advanced menus provide additional options for the UPS and are available only if the display
interface is configured to use the Advanced Menus.
About Display information about this unit:
• Unit model number
• Serial number
• Battery installation date
• Suggested battery replacement date
• Replacement Battery Cartridge model number
• UPS firmware version
Menu General Functions
Status View detailed information about the UPS:
• Energy meter
• Number of external battery packs connected to the UPS
• Load current
• Status of the Controllable Outlet Groups
• Battery voltage
Configuration Configure advanced settings for the UPS:
• UPS and Controllable Outlet group delays and settings
• High and lower transfer points
• Sensitivity settings
• Date of last battery replacement
Control Control the UPS and Controllable Outlet Groups to turn on,
turn off, or reboot
Test & Diags Perform a UPS alarm test or a runtime calibration test
Log View the event log for information about any changes to
the UPS and any faults
About View information about the unit:
• Hardware version
• Software version
• NMC information (if applicable)
Menu General Functions