Speco Technologies VMS-2 - Manual (Page 3)

I. CONTENTS :
1. 4” LCD monitor
2. Carry Bag and Belts
3. 1000mA Rechargeable Ni-H Battery
4. Three velcos , two for monitor and one for battery.
5. 30 cm power cord.
6. 15V DC Charger. This Charger should only be used to
charge the battery NOT to supply the unit. If used on the
unit Serious damage may occur which will not be covered
by the warranty.
7. RCA to BNC adapter 4 pcs.
8. Spacer Protector
II . Power Operating and Connections
1. Please charge the Ni-H Battery for one and half hours
before using it for the first time.
2. Please stick two velcos to the rear of monitor. Then place
the monitor in the correct position in the bag. This will then
fasten the monitor to the bag will restrict any movement
when the bag lid is open.
3. Connect the battery to monitor via the DC power cord
(Supplied).