Symbol Technologies LA-5030 - Manual (Page 32)

LA-5030 PC Card & LA-5033 PCI Adapter User Guide 3-8
3.2 Installing the LA-5033 PCI Adapter and Driver for use with
Windows 2000 Zero Config
Use the Windows 2000 Zero Config utility as the adapter management tool if using the LA- 5033 PCI
adapter without the Symbol Configuration Utility or if using a 3rd party software supplicant. The
Symbol Configuration Utility does not function properly while 3rd party software supplicants are
loaded on the system.
If the Symbol Configuration Utility resides on the system, use Windows 2000
Add/Remove Programs to uninstall it before installing the driver or
Select Start->Programs->Symbol Wireless Networker->Uninstall.
To install the LA-5033 PCI adapter and driver without the Symbol Configuration Utility in
Windows 2000:
The user is required to have Windows 2000 SP4 installed for full feature
functionality.
1. Ensure the previously installed Symbol Wireless Networker 802.11 a/g Configuration Utility
and driver has been removed (if necessary).
2. Download the driver and Symbol Wireless Networker 802.11 a/g Configuration Utility from
the Symbol Web site
(http://www.symbol.com/services/downloads/wn_abg_drivers.html).
A File Download window displays prompting the user to either open the driver and
software installer or save the installation package to the system.
3. Select Open to proceed with the installation. A WinRAR self-extracting archive
window displays.
To manually install the driver and software package select Save, define a
destination location for the driver and software package and follow the prompts
displayed by the installer.
4. Select Install from the WinRAR self-extracting archive window to automatically extract the
driver package and launch the Symbol Wireless Networker Install Menu.