Service information – Symbol Technologies LA-5030 User Manual
Page 10
LA-5030 PC Card & LA-5033 PCI Adapter User Guide
viii
•
Sequential lists (those that describe step-by-step procedures) appear as numbered lists.
•
Icons indicate notes, cautions and warnings. Before working on any equipment, be aware of
the hazards associated with its installation and use. Also, become familiar with standard
practices for preventing accidents.he following icons are used in this document:
Indicates tips, hints and special requirements.
Care is required
. Disregarding cautions can cause data loss or equipment
damage.
Indicates a potentially dangerous condition or procedure that only Symbol-
trained personnel should attempt to correct or perform.
Service Information
If you have a problem with your equipment, contact the
for your region.
See
Appendix C
for additional contact information. Before calling, have the model number, serial
number, and several of your bar code symbols at hand.
Call the Support Center from a phone near the scanning equipment so that the service person can
try to talk you through your problem. If the equipment is found to be working properly and the problem
is symbol readability, the Support Center will request samples of your bar codes for analysis at
our plant.
If your problem cannot be solved over the phone, you may need to return your equipment for servicing.
If that is necessary, you will be given specific directions.
Symbol Technologies is not responsible for any damages incurred during shipment if the
approved shipping container is not used. Shipping the units improperly can possibly void
the warranty. If the original shipping container was not kept, contact Symbol to have
another sent to you.