Sony DVP-LS755P - Manual (Page 18)

18
Notes
• Do not connect a VCR, etc., between your TV and the player. If you pass the player signals via the VCR,
you may not receive a clear image on the TV screen. If your TV has only one audio/video input jack,
connect the player to this jack.
• Consumers should note that not all high definition television sets are fully compatible with this product and
may cause artifacts to be displayed in the picture. In case of 525 or 625 progressive scan picture problems,
it is recommended that the user switch the connection to the ‘standard definition’ output. If there are
questions regarding your TV set compatibility with this 525p and 625p DVD player model, please contact
our customer service centre.
• When you connect the player to your TV via the SCART (EURO AV) jacks, the TV’s input source is set
to the player automatically when you start playback. In this case, press t (TV/video) on the remote to
return the input to the TV.
• If you set “LINE” in SCREEN SETUP to “RGB” (page 25, 67), the player outputs no component video
signals.
Using the NORMAL/PROGRESSIVE switch
By using the NORMAL/PROGRESSIVE switch, you can select the signal format in which the
player outputs video signals: interlace or progressive. The switch takes priority over the setting
made in “COMPONENT OUT.”
Connect the player using the COMPONENT VIDEO OUT jacks (pattern
A above), and set the
NORMAL/PROGRESSIVE switch to NORMAL (interlace) or PROGRESSIVE. The
PROGRESSIVE indicator lights up when the player outputs progressive signals.
◆PROGRESSIVE
Set to this position when:
– your TV accepts progressive signals, and,
– the TV is connected to the COMPONENT VIDEO OUT jacks.
Note that the pictures will not be clear or no picture will appear if you set the NORMAL/
PROGRESSIVE to PROGRESSIVE when either of the above conditions is not met.
◆NORMAL (interlace)
Set to this position when:
– your TV does not accept progressive signals, or,
– your TV is connected to jacks other than the COMPONENT VIDEO OUT jacks (LINE OUT
(VIDEO) or S VIDEO OUT).
Note
When the NORMAL/PROGRESSIVE switch is set to PROGRESSIVE, you cannot select “LINE” and
“COMPONENT OUT” in “SCREEN SETUP.”
VCR
CD/DVD player TV
Connect
directly