Sanyo DP50741 - Manual (Page 10)

10
Need help? www.sanyoctv.com 1-800-877-5032
SETUP
(CONTINUED)
__________________
ON-SCREEN MENU OPERATION
Use this feature to automatically block programs with
content you deem as inappropriate for
viewing by your children.
NOTE: This feature is designed to comply with the
United States of America’s FCC V-Chip regula-
tions. Therefore, it may not function with broad-
casts that originate in other countries.
ADJUSTING THE V-CHIP RATINGS
Select ON and press ENTER. Select Adjust (Standard)
and press ENTER.
NOTE: Blocking a rating will automatically block all
higher ratings. Unblocking a rating will auto-
matically unblocks all lower ratings.
For V-Chip (Movie) ratings select Movie and press
ENTER, and then select the desired MPAA rating limit.
Press the EXIT key to close the V-Chip menu.
V-Chip (parental control)
For V-Chip (TV) ratings select TV and press ENTER. Use
the CURSOR
▲ ▼ keys to select a rating and press
ENTER. Use the CURSOR
▲ ▼ keys to set the rating’s
status as Blocked or Viewable. Once ratings are set,
press the EXIT key to close the V-Chip menu.
NOTE: Some TV ratings offer more detailed settings
such as Dialogue, Language, Sexual, and
Violence.
ADVANCED V-CHIP SYSTEM (RRT5)
RRT5 (V-Chip Regional Ratings 5) is an advanced V-Chip
ratings system for over the air digital channels. When the
HDTV detects compatible RRT5 data, it’s downloaded &
stored in memory, and the Setup V-Chip screen is then
modified to show the Adjust (Advanced) option.
Use the CURSOR
▲ ▼ and
keys to highlight the
different options, and use the ENTER key to block or
unblock the selected rating.
NOTE: When vertical scroll bars appear, press CURSOR
▲▼ to gain access to the additional ratings.
MORE INFORMATION
Additional information about MPAA (Motion
Picture Association of America) and V-Chip rating
can be found at: www.mpaa.org and www.v-
chip.org, respectively.
This feature allows you to set a Current Time for your
HDTV and enable a Switch On Time for the HDTV to
turn on at a specific time of day.
When On Timer Function is set to ON, the TV will
automatically turn on at the previously set Switch on
Time.
Clock timer
When No Signal Shut-off feature is set to ON, it will
allow the HDTV to automatically turn off when no
video and/or audio signals are being received.
NOTES: By factory default, this feature is set to ON.
TV will automatically turn off if no AV signals
are received in a time span of 15 minutes.
Use the CURSOR
▲▼ keys to select On or OFF and
press ENTER.
No Signal Shut-Off
Use the CURSOR
▲▼ and
keys to modify the
Current Time and/or Switch On Time.