beautypg.com

Setting-up the projector, Positioning: room light, Adjustable feet – Sanyo PLC-XF10NL User Manual

Page 7

background image

200"

154"

26.9' (8.2 m)

600"

462"

80.7' (24.6 m)

7

40"

77" 115"

154"

231"

308"

462"

600"

100"

150"

200"

300"

400"

760 mm

760 mm

100"
SCREEN

POSITIONING:

ROOM LIGHT

This projector is basically designed to project on a flat projection surface.

This projector can be focused from 4.9' (1.5 m) ~ 80.7' (24.6 m).

Refer to the figure below as an example when positioning the projector to the screen.

The projector should be placed in a room with
limited light. Picture quality will be directly
affected by lightning conditions.

Minimum Zoom

Maximum Zoom

DISTANCE

Screen
Size

Max. Zoom

Min. Zoom

Distance

40"

4.9' (1.5 m)

100"

77"

13.1' (4.0 m)

150"

115"

20' (6.1 m)

300"

231"

40' (12.2 m)

400"

308"

53.8' (16.4 m)

THIS PROJECTOR SHOULD BE SET IN THE WAY INDICATED. NEVER HANG
THE PROJECTOR, OR FALL DOWN ON ITS SIDE. IT MAY RESULT IN FIRE
HAZARD.

Picture tilt and projection angle can be adjusted by twisting
ADJUSTABLE FEET. Projection angle can be adjusted up
to 4 degrees by rotating Adjustable Feet.

MOVE THE PROJECTED IMAGE POSITION

Adjust the projected image position (maximum 760mm
downward or upward on the 100" screen) by using lens shift
function. (See page 33.)

UP

UP

DOWN

DOWN

ADJUSTABLE FEET

ADJUSTABLE FEET

SETTING-UP THE PROJECTOR

INSTALLATION

This manual is related to the following products: