Sony D-NE329LIV - Manual (Page 17)

To remove the CD
Remove the CD player from the speaker
stand. Then remove the CD while pressing the
pivot in the center of the tray.
To listen to the CD using the headphones
connected to the CD player
In step 4 of “Listening to the CD using the
speaker stand” ( page 16), set the
 /
switch on the stand to  .
To use the speaker stand without using the
AC power adaptor
1 Insert the battery according to the
procedure described in “When using a dry
battery” ( page 12).
2 Set the /OFF•POWER ON switch on
the stand to /OFF.
3 Set the  / switch on the stand to .
4 Press  /ENTER on the player.
Notes
• You cannot change the CDs when the CD player is
connected to the speaker stand.
• Close the lid of the CD player securely, then insert
the player into the speaker stand.
• When you carry the speaker stand with the CD
player connected, hold both the stand and the
player securely.
• When you play the CD while it is connected to the
speaker stand, the volume setting is restored to the
default.
• When you use the speaker stand without the AC
power adaptor, the sound volume level output from
the speakers becomes lower because the sound is
output without passing through the amplifier of the
stand.
Continued 
17
Playback
D-NE320SP/NE329SP/NE329LIV.GB.2-318-873-14(1)