Candy GO 712 H TXT - Manual (Page 5)

A detailed guide around your Infotext menu
This machine will operate prior to programming the Infotext set up. However, this machine has
Start Delay and Programme End functions and for these functions to work efficiently the
Infotext set must be programmed. This is a simple operation and special care has been taken
during manufacture to ensure that the user can operate this machine simply and effectively.
Programming the machine
Infotext needs to be programmed so that the correct clock setting, language and personal
requirements are set. When the machine is turned on and the programme dial is moved away
from the “off” position to the programme selections a welcome message will appear.
This message is displayed for a short time while the machine recognises which programme
has been selected. When the machine is ready, the programme details will appear on the
display and from here you may now beging programming the machine.
Example
Enter the Menu
Prior to entering the Infotext menu please note you have 30 seconds per operation to make
your selection. Should you run out of time the display will return to the start screen, and you
simply have to re-enter the Infotext menu at continue with the programming.
From this stage the menu can be programmed. Hold down the ( ) and the ( ) buttons
together for 5 seconds or until the beep sounds.
The menu options can be changed by pressing the ( ) button.
To confirm and enter an option press the ( ) button.
Setting the language
Your washing machine is automatically set to English. If you require another language (it is this
language you will read when utilising the machine) follow this procedure:
Hold down the ( ) and the ( ) buttons together for 5 seconds or until the beep sounds
to enter the Menu selection the display will then ask you to choose the desired language.
Release the ( ) and ( ) buttons and scroll through the language options by pressing
the ( ) button until you reach the language of your choice.
9
WELCOME
00.00
COTTON WHITE
HEAVY SOIL
14 90
8
SET FINAL BEEP
YES
if NO is displayed press ( )
Press ( )
ENABLE MEMORY ?
YES
if NO is displayed press the ( )
Press ( )
SET DEMO MODE ?
NO
always select NO, if YES press ( )
Press ( )
EXIT MENU?
YES
if NO is displayed press the ( )
Press ( )
COTTON WHITE
HEAVY SOIL
reverts back to the wash programme
selected
You are now able to select any wash programme. You can if you wish also set a delay start.
Where more detailed information is required refer to the relevant section from the following pages.
14 90