Sharp SGH-I600 User Manual

Page 30

SAMSUNG Proprietary-Contents may change without notice

Exploded View/Disassembly&Assembly Instructions

5-9

This Document can not be used without Samsung's authorization

1) Press WHEEL KEY connector so that is sonant

'Exactly' vertically.

2) Notice that components around the screw should

not be in damage.

※ WHEEL, PBA screw spec. : M1.4, L3

1) Notice that components around the screw should

not be in damage.

※ 1.3M CAMERA BRACKET screw spec. : M1.4, L4

1) Observe as KEY tension can grow worse in case

of escapes and attaches groove.

1) Check the RECEIVER and KEY PAD setting.

1) Attach the VOLUME KEY and POWER

KEY F-PCB in accordance with the groove.

2) Screw six points in the WHEEL KEY

and the PBA.

1) Connect the WHEEL KEY to the

connector on the PBA.

1) Assemble the 1.3M CAMERA BRACKET.

2) Screw two points in the CAMERA

BRACKET.

1) Check the Front Case and the PBA set.