Sharp SGH-I600 - Manual (Page 27)

SAMSUNG Proprietary-Contents may change without notice
Exploded View/Disassembly&Assembly Instructions
5-6
This Document can not be used without Samsung's authorization
1) Notice that components around the screw should
not be in damage.
2) Notice that the WHEEL KEY F-PCB should not be
in damage.
※ WHEEL, PBA screw spec. : M1.4, L3
1) Notice that the connectors and other components
should not be in damage.
1) Notice that the double-side tapes and shield-can
should not be in damage.
2) Notice that the F-PCBs should not be in damage.
1) Notice that the KEY F-PCB should not be in
damage.
9 10
11 12
1) Unscrew six points in the WHEEL
KEY and the PBA.
2) Disjoint the WHEEL KEY connector.
1) Disjoint the INTENA connector.
2) Disjoint the LCD connector.
1) Detach the POWER KEY and VOLUME
KEY F-PCB using the tweezers.
1) Detach the KEY F-PCB connector
insulation tape using the tweezers.
2) Disjoint the KEY F-PCB connector.