Samsung MAX-T35 - Manual (Page 8)

GB GB
You can store up to:
15 FM stations
15 AM stations
Switch the system on by pressing STANDBY/ON.
Select the TUNER function by pressing TUNER.
Select the required frequency band by pressing TUNER (BAND)
again on the front panel or TUNER (BAND) on the remote control.
Result: The appropriate indication is displayed:
FM Frequency Modulation
AM(MW) Medium Wave
To search for a Press TUNING MODE
station...
Manually Once or more times until MANUAL
is displayed.
Automatically Once or more times until AUTO is
displayed.
Select the station to be stored by:
Turning the MULTI JOG knob to the right or to the left to increase
or decrease the frequency respectively
or
Pressing TUNING or on the remote control
To scroll through the frequencies faster when searching
manually, hold down the
TUNING Down or Up buttons.
The automatic search procedure may stop on a frequency that
does not correspond to a radio station. If this happens, use the
manual search mode.
Adjust the volume by:
Turning the VOLUME knob on the front panel
or
Pressing the VOLUME + or – buttons on the remote control
Select the FM stereo or mono mode by pressing MO/ST.
If you do not want to store the radio station found, revert to Step 4
and search for another station.
Otherwise:
a Press TUNER MEMORY.
Result: The PRGM is displayed for a few seconds.
b Press TUNING Down and Up to assign a program number .
c Press TUNER MEMORY to store the radio station.
Result: PRGM is no longer flashed and the station is stored.
To store any other radio frequencies required, repeat Steps 3 to 8.
The PROGRAM function can be used to assign a new station
to an existing program number.
Searching for and Storing the Radio
Stations
1
2
3
4
5
6
7
8
9
You can decide:
The order in which you listen to the tracks on the discs loaded
Which tracks you do not wish to listen to
You can program up to 24 tracks.
You must stop the compact disc player before selecting the tracks.
This feature can be combined with the Repeat function.
If the CD function is selected, stop the player by pressing .
Load the selected CDs.
Press PROGRAM.
Result: The following indications are displayed:
(01 = Program no., PR1 = Disc no., – – = Track no. on the disc)
If necessary, select the disc containing the required track by pressing
the corresponding DISC (1, 2, 3) button.
Select the required track by turning the MULTI JOG knob:
To the left to move back through the tracks
To the right to move forward through the tracks
Press PROGRAM to confirm your selection.
Result: The selection is stored and is displayed.
To select other tracks, repeat Steps 4 to 6.
Press MP3-CD/CD ( ) to listen to the track selection in the order
programmed.
To... Turn the MULTI JOG knob...
Listen to the current track again One notch to the left
Listen to the previous track Two notches to the left
Listen to the next track One notch to the right
Skip forwards or backwards one The appropriate number of
or more tracks notches to the right or to the
left
To cancel the selection, press .
Once if the compact disc player is stopped
Result:
PRGM is no longer displayed.
If you open the compartment, the selection is cancelled.
If you select the number of a disc which is not loaded or a
track which does not exist on the CD, the selection skips to the
next programmed track.
You can also use the / buttons to select the required
tracks in step 5, 9.
You can check or change your selection of tracks at any time.
Press once if you have started listening to the selection.
Press PROGRAM.
Result: The following indications are displayed:
(CH = Check, 01=Program No, CH1 = Disc No, – – = Track No on the
disc)
If you have already programmed 24 tracks, CH is displayed
instead of PR when you press PROGRAM.
Press PROGRAM again.
Result: The first track selected is displayed, together with the letter
CH (Change).
Press PROGRAM once or more times until the track to be changed is dis-
played.
If necessary, press the corresponding Disc (1, 2, 3) button to change discs.
Press and or turn MULTI JOG to select a different track.
Press PROGRAM to confirm your change.
Press MP3/CD-CD ( ) to start listening to the selection.
Result: The first track selected is played.
1
2
3
4
5
6
8
9
10
Programming the Order of CD Play-
back
7
1,10
4
8
5,9 5,9 5,9
1
2
3
4
5
6
7
8
5
8
6
6 1
2,3,4,7
Checking or Changing Programmed
CD Tracks
In Tuner mode
In manual tuning mode, you can use MULTI JOG or /
button on the panel front to manual search a radio station.
During Tuner auto searching, press button to stop auto
searching.
In Preset tuning mode, you can use MULTI JOG or /
button on the panel front to search a stored radio station.
4
2,3
5,8
1
7
6
5 5,8
8
15
14
+10
VOLUME
SURROUND MODE SOUND MODE TUNING MODE
MP3-CD / CD
MUTE
TUNING
/ALBUM
6
6
+10
4
5,8
5,8
VOLUME
REC / PAUSE TAPE 1/2
TAPE
MP3-CD / CD
COUNTER RESET
MUTE
TUNING
/ALBUM
6
8
6
3,6
1
6
MAX-T35 GB noR 1~15 4/21/06 8:2412:0 Page 14