Sangean RCR-2 - Manual (Page 14)

13
Note:
If you like to be awoken by the radio station you are listening,
press Alarm system 1 or 2 for more than 2 seconds, the
appliance will store the radio alarm station, then follow above
procedures 2-8 to set radio alarm.
Alarm with HWS alarm buzzer
1. Select alarm system 1 or 2 by pressing the alarm 1 or 2 button
(11 or 10). Display will blink selected alarm system symbol.
2. Press alarm SET button 13, display will blink both alarm hour and
alarm mode with a beep.
3. Press alarm mode button 17 to select alarm buzzer mode until
display shows .
4. Press + or – to adjust required alarm hour then press SET button
again, display minute digits will blink. Press + or – button to adjust
required alarm minute.
5. Press week day selection 1-7 ( Sunday – Saturday ) to select
required alarm week days. Display will show the days of the week
on which you wish to be woken by the buzzer alarm.
6. Press alarm button 1 or 2 to confirm all the alarm set with a beep.
Display will show indicating HWS buzzer alarm is set .
Note:
If the alarm week day (s) is not selected, display will blink all the
week days and , the alarm will not be activated.