beautypg.com

Sim2 Seleco SIM2 Grand Cinema HT User Manual

Page 6

background image

a c c e s s o r i e s

RII Inputs

2 x Composite Video via RCA

2 x S-Video via 4 mini DIN

1 x RGB via 15 pin VGA ‘D’ Connector

1 x RGBS via 4 x RCA connectors

1 x YcrCb via 3 x RCA connectors

1 x serial RS232 via Dsub 9 pins connector

1 jack 12V power output, active

when the projector is ON

1 jack 12V power output, active when

16:9 and User format is selected

REMOTE INPUT INTERFACE

SIM2 has designed a unique accessory (optional)— the Remote Input Interface (RII) - that easily connects

the projector to the different video sources used in home theatre applications. Positioned next to the video

sources (digital receivers, DVD, VCR, etc.), the RII is linked to the projector through a unique cable,

designed specifically to eliminate unsightly multiple cable runs to the projector and dramatically ease the

installation process.

Exclusive and sleek

design bracket.

CEILING, WALL, AND FLOOR MOUNTING BRACKET

Thanks to a specific and proprietary long throw ratio zoom lens, ceiling

installations are no longer a problem. The GRAND CINEMA HT projector

may be installed using an optional bracket mounted to the ceiling corner

opposite to the screen, avoiding the unpleasant placement of the product

in the middle of the room. Also, SIM2 has designed a special and very

stylish floor bracket to match the awarded GRAND CINEMA HT design.

DCDi

TM

by FAROUDJA LABORATORIES. This new technology applies motion

adaptive deinterlacing that prevents the introduction of motion artifacts and jagged

edges from video signals that originate from video cameras. The DCDi™ also features

patented 3/2 pull-down with advanced edit detection for exact reconstruction of the

original film frame.

The triple keystone adjustment provides a 16° (+/-8°) optical correction (lens shift) for

a perfectly rectangular image without artifacts, and where high-ceiling installations

are an issue, a digital keystone correction (vertical and horizontal) can be added via

Remote Control up to a maximum projector tilt of 42° (+/-21°). Also, the DVI-D input

allows complete digital connectivity to an increasing amount of video sources

equipped with digital outputs, hence guaranteeing a perfect reproduction without any

loss of information or interference in the signal.

... HT300 PLUS