Soleus Air SG-TTW-10HC - Manual (Page 13)

HEATING FEATURE (on some models) : YOU WILL SEE
DO THIS:
:
PRESS
MODE BUTTON
SELECT HEAT
Note: This feature can be used with any combination of FAN Speeds, Timer, or Sleep Modes. When in the “Heat” Mode, the
fan will run continuously while heat is needed. The temperature will automatically be maintained anywhere between 61°F
(16°C) and 86°F (30°C). When the room set temperature is satisfied, the fan will cycle off and on to circulate and sample
the room air.
SLEEP FEATURE : YOU WILL SEE
DO THIS:
:
PRESS
MODE BUTTON
SELECT SLEEP
Note: Press this button, Sleep On and Sleep Off can be selected.After powered on,Sleep Off is defaulted. After the unit is
turn off, the Sleep function is canceled. As the unit is in Cool or Energy Saver Modes, if Sleep Mode is set, SET TEMP. would
increase 1℃ in 1 hour and 2℃ in 2 hours. As the unit is in Heat Mode, if Sleep Mode is set, SET TEMP. would decrease 1℃ in
hour and 2℃ in 2 hours.Under Fan Only and Auto modes, this function is not available.
TO TURN UNIT OFF: YOU WILL SEE:
DO THIS:
PRESS
ON/OFF BUTTOT
Air Conditioner Features(continued)
12
The 4-Way directional louvers allow you to direct the air up or
down, left or right. Use the handle in the center of the louvers to
change the air direction.
4-Way Directional Louvers