Siemens C61 - Manual (Page 72)

©
Siem
ens AG
2003, L
:\C6
1\a
m
_v2\_v
on_web
er_031
223\US\C60
_Se
tup.fm
71 Setup
VAR Langua
ge: Am
erica
n; VAR is
sue date: 28-N
ovemb
er-2003
left page (71) of C61 Lion, fug us, A31008-H5880-A40-2-4A19 (15.1.04)
§Menu§
¢ m ¢
Call Setup
¢
Select a function.
Headset
Only in conjunction with an original
Siemens headset (p. 95). If an
original Siemens Headset is used
the profile is automatically activated
when the headset is plugged in.
Auto Answer
(factory default: off)
Calls are accepted automatically
after a few seconds (except where
the ringer is switched off or set to
beep). You should therefore be
wearing the headset.
Eavesdropping is possible!
Automatic setting
Accept call with the Call key or PTT
key (Push To Talk) when the key lock
is activated.
Call Forward
§Menu§
¢ m ¢
Call Forward
¢
Select a function.
You can set the conditions for which
calls are forwarded to your mailbox
or other numbers.
Set up call forwarding (example):
The most common condition for call
forwarding is, for example:
All Calls
b
Other calls are forwarded.
n
Symbol in the top line
of the display in standby
mode.
Unanswered
b
G
Select Unanswered .
(Includes the conditions
Not Reachable , No Reply ,
Busy see below)
§Select§ Press.
Set Select.
J
Enter the phone number
to which the caller will be
forwarded (if not already
done)
Or
·
Select this phone number
from the Phonebook or
via §Mailbox§ .
§OK§ Confirm. After a short
pause, the setting is con-
firmed by the network.
Auto answer
If you do not notice that you phone has
accepted a call, there is the danger that
the caller may eavesdrop.