Sharp KB-4425J - Manual (Page 13)

13
BEFORE OPERATING
Before operating your new range make sure you read and understand this operation manual completely.
• Before the range can be used, follow these steps:
1 Plug in the range. The display will read, “Please wait 30 seconds”. After 30 seconds, you can select either Video Demo or Set Clock.
2 Touch Set Clock and follow the instructions below.
Note:
• If no choice is made for 30 seconds, the Video Demo will begin automatically. To cancel the Video Demo, Touch the
Stop/Clear pad and the display will return to the Home Screen. To set the clock, touch the Setup pad, touch Clock and follow
the directions on the touchscreen.
TO SET DATE AND TIME
1 After touching Set Clock or Clock, enter the correct month
by touching Month repeatedly. The month appears in the
banner at the top of the display. When set for the correct month,
touch ENTER.
2 Enter the date by touching the number pads on the control
panel. Example: for June 1, touch
01
. Check the date in
the banner, then touch ENTER.
3 Enter the time by touching the number pads. Select AM/PM
and then touch ENTER.
4 The month, date and time will appear in the banner. The
display will return to the Home Screen.
Note:
• If you make a mistake while setting the clock, touch Stop/Clear pad. The Home Screen will appear. To set clock again, touch
Setup pad on the control panel. Then touch Clock and follow the directions.
• If you want to change the setting of the time of day, Touch Setup pad and follow the directions.
• If the electrical power supply to your range should be interrupted, the screen will intermittently show Video Demo or Set
Clock after the power is reinstated. If this occurs during cooking, the program will be erased. Simply touch Set Clock and
follow the directions.
Convection
Bake
Broil
Reheat
Defrost
Micro Cook
2:40 PM DEC 22
TOUCH MICROWAVE DRAWER
PAD TO VIEW MICROWAVE
DRAWER HOME PAGE.
TOUCH LOWER OVEN PAD
TO VIEW LOWER OVEN
HOME PAGE.