Sanyo PLC-XF60A - Manual (Page 10)

10
Preparation
q w e r t y u
q LAMP 1 REPLACE indicator
Turns orange when the life of the projection Lamp 1
draws to an end. (p.62, 67)
w WARNING TEMP indicator
Blinks red when the internal temperature of the
projector is abnormally high. (p.60, 65)
t READY indicator
- Lights green when the projector is ready to be turned
on and remains green lighting during operations.
- Blinks green in the Power Management mode or when
the projector is shutdown due to a power failure.
(p.65~67)
Indicators
r LAMP indicator
- Lights red when the projector is in the stand-by mode.
- Turns a dim lighting when the projector is turned on.
(p.65~67)
e WARNING FILTER indicator
Lights orange when the projector's filter is clogged with
dust. (p.61, 66)
u LAMP 2 REPLACE indicator
Turns orange when the life of the projection Lamp 2
draws to an end. (p.62, 67)
y SHUTTER indicator
Lights blue when the shutter is closed. (p.66)