Seagate SV35 SERIES ST3500410SV - Manual (Page 22)

14 SV35 Series SATA Product Manual, Rev. D
2.9.5.2 Nonoperating shock
2/3 disk models
The nonoperating shock level that the drive can experience without incurring physical damage or degradation in
performance when subsequently put into operation is 300 Gs based on a nonrepetitive half-sine shock pulse of 2
msec duration.
1 disk models
The nonoperating shock level that the drive can experience without incurring physical damage or degradation in
performance when subsequently put into operation is 350 Gs based on a nonrepetitive half-sine shock pulse of 2
msec duration.
2.9.6 Vibration
All vibration specifications assume that the drive is mounted securely with the input vibration applied at the drive
mounting screws. Vibration may be applied in the X, Y or Z axis.
2.9.6.1 Operating vibration
5Hz–22Hz 3.0 Gs (Limited displacement)
22Hz–350Hz 3.0 Gs
350Hz–500Hz 3.0 Gs
The maximum vibration levels that the drive may experience while meeting the performance standards specified in
this document are specified below.
3-disk model
2/1-disk models
5Hz–22Hz 0.25 Gs (Limited displacement)
22Hz–350Hz 0.50 Gs
350Hz–500Hz 0.25 Gs