Sharp Aquos LC-37D90U - Manual (Page 46)

45
MENU [Setup ... Auto Sync.]
No Yes
Auto Sync. adjustment (for Analog
PC input mode only)
For automatically adjusting the PC image.
NOTE
• For resetting all Fine Sync. adjustment items to the factory
preset values, press a/b to select “Reset”, and then
press ENTER.
• It is not necessary to adjust the “Clock” or “Phase” when a
digital signal is being input, so it cannot be selected.
NOTE
• When Auto Sync. is successful, “Completed” displays. If
not, Auto Sync. failed.
• Auto Sync. may fail even if “Completed” displays.
• Auto Sync. may fail if the computer image has low
resolution, has unclear (black) edges, or is moved while
executing Auto Sync.
• Be sure to connect the PC to the TV and switch it on
before starting Auto Sync.
• It is not necessary to use “Auto Sync.” when digital signal
is being input, so it cannot be selected.
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
Press a/b to select “Auto Sync.”, and then
press ENTER.
Press c/d to select “Yes”, and then press
ENTER .
• Auto Sync. starts and “Now adjusting the
image.” displays.
Fine Sync. adjustment
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimize the image.
Useful adjustment settings
1
2
4
3
Selected item
H-Pos.
V-Pos.
Clock
Phase
Description
Centers the image by moving it to the
left or right.
Centers the image by moving it up or
down.
Adjust when the image fl ickers with
vertical stripes.
Adjust when characters have low
contrast or when the image fl ickers.
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
Press a/b to select “Fine Sync.”, and then
press ENTER.
Press a/b to select the specifi c adjustment
item.
1
2
4
3
Press c/d to adjust the item to your desired
position.
5
30%
Reset
H-Pos. [ 90] a b
a b
a b
a b
V-Pos.
Clock
Phase
[ 39]
[ 90]
[ 20]
Press MENU to exit.
5
Press MENU to exit.
6