Sony J-H1 - Manual (Page 35)

Chapter 5
Setup Menu
Chapter 5 Setup Menu
5-5
4
Holding down the JOG/SHUTTLE button, turn the
JOG/SHUTTLE dial to change the setting to 25,
then release the JOG/SHUTTLE button.
The displays change as shown below.
To cancel switching of the system
frequency
Holding down the SHIFT button, press the SET/
MENU button the required number of times to exit
from the menu.
5
Press the SET/MENU button.
The displays change as shown below.
6
Turn the POWER switch off momentarily, then
turn it on again.
This switches from the 29.97 to the 25 system; the
29.97 indicator goes off, and the 25 indicator
lights.
25 PsF (50i)
SYSTEM FREQUENCY SELECT
Push SET button!!
Time data display
Monitor screen
25 PsF (50i)
SYSTEM FREQUENCY SELECT
Turn off/on POWER!!
Time data display
Monitor screen
The menu settings disappear from the time data
display, and it returns to the normal indicators.
Menu bank operations (menu items B01 to
B12)
This unit allows two different complete sets of menu
settings to be saved in what are termed “menu banks,”
numbered 1 and 2. Saved sets of menu settings are
recalled for use as required.
To jump to menu item B01 or H01
The unit recalls any required menu items when you
turn the JOG/SHUTTLE dial after pressing the SET/
MENU button while holding down the SHIFT button.
Press the SET/MENU button while holding down the
SHIFT button, then press the CTL/TC/UB button.
Every time you press the CTL/TC/UB button, menu
item H01 or B01 is recalled alternately.
Saving the current active menu settings
Set menu item SAVE BANK 1, basic menu item B11,
or SAVE BANK 2, basic menu item B12, to ON,
depending on which of the menu banks you wish to
use to save the setting, then press the SET/MENU
button.
Recalling settings from a menu bank
Set menu item RECALL BANK 1, basic menu item
B01, or RECALL BANK 2, basic menu item B02, to
ON, depending on which of the menu banks you wish
to recall settings from, then press the SET/MENU
button.
Current active
menu settings
Recall
Save
Menu bank 1
Recall
Save
Menu bank 2
“POWER OFF/ON”
scrolls sideways as
it appears.